How to Change HID to Halogen

How to Change HID to Halogen

Are you tired of buying HID kits to replace the bulbs every time they expire? What about your car headlights? Do you feel that HID lights are too much for you? First of all, let’s find out what’s HID lights. HID lights are High-intensity discharge lamps. They have precise focus and are very bright, up to 10,000 lumens or more. Halogen lamps use halogen gas to increase light output. 

This article shows you how to take your HID light and convert them back to Halogen lights. HID lights can cost you money. They are brighter than LED lights, but they can also burn fast. 

HID vs. Halogen

HID is twice brighter than the halogen lights and three times more luminous than LED lights. The thing these days is that people like to convert their HID car lights to halogen. Hence, this is understandable, considering that halogen can be a cheaper option. But, before doing so, check your local laws. Because doing this to your car can be illegal. 

Step by Step Guide on How to Change HID to Halogen

Step 1: You need to have a screwdriver. It can be a plain, old, and regular one. Thus, this is to eventually take the bracket system that’s holding the HID out. So once your bracket is off, place it to the side. What you want to do is, you want to find where the car connector for the headlight is. It is easy to disconnect once you find it unless you have the bolt for the HID assembly in there. You need to remove that with a screwdriver. 

Step 2: Check your Halogen light. There are many brands in the market. One popular brand, for example, is the Sylvania Silver Star Ultra halogen lights. These halogens are close to HID lights in terms of brightness. They have parts that make it easy for you to swap your lights in your car. 

Step 3: Take the Halogen light bulb and it to connect it right to the designated wires. Ensure that you avoid cutting out any wiring or damaging your halogen or HID light in the process. In case you might need to swap again in the future. 

Step 4: There are these three prongs that you can see. One is wider than the other two. Make sure you match up to the holes right there and your assembly in your car light. 

Step 5: Make sure you don’t break the bulb in the process. You line it up and give it a little twist, make sure it’s fitted in there properly. Do a little twist to ensure it’s fitted well. 

Step 6: Turn your light on to see if it works. If it doesn’t, check if the cables are connected or not. You can also inspect if it is fitted correctly. 

Other uses

You can also apply this to other forms of HID lights like those in your emergency power lights or outdoor lighting. Once you have done this, you’ll realize that they all have the same internals.

Conclusion

Switching from HID to Halogen can save you money. Hence, this is an essential technique in these times of financial crises. After all, how much light do you need? 

Leave a Comment

Your email address will not be published. Required fields are marked *