When you want bass added in your car, it means you have to open your wallet and spend some money to make some upgrade. There’s no need to touch your money when you have an amplifier and subwoofer.
You can attain the desired sound if you tune in your system. Subwoofers can give you a booming bass.
But if you’re more into clarity, you have to upgrade your speakers so you can attain the sound quality that you like.
Factors that Can Produce Louder Sound
You should not keep on believing the common thought that the speaker’s loudness doesn’t depend on the physical dimension. There are other factors that contribute more to this concern.
Some of them are wattage, volume capacity, insulation, and other variables. You can find speakers in a small dimension, but it produces loud, clear, and rich sound.
The level of loudness and volume is dealt with the amount of power that goes into your speakers. It makes wattage one of the important factors.
Stereo receiver and the amplifier release power and wattage. The stereo receiver typically carries the specific amount of power that is suitable for its capacity while the sound system’s amplifier can accommodate additional wattage.
The total wattage that feeds the sound system is the factor that activates on the intensity of the speaker’s loudness. It’s produced by both the amplifier and receiver.
2.The Size of the Speaker
The physical dimension of the speaker has a role in dealing with the volume. You can find speakers in larger diameter in a classic sound system to give off more resonant, louder sounds.
The expansion of the speaker’s diameter allows the sound to reach a higher threshold. But the size is not adequate to boost the sound.
As long as you have high wattage, the sound can be powerful. Therefore, size and wattage go hand in hand together.
3. Cone Reflex
You would see traditional speakers in a conical form. The back part is small while the face is flaring out and wider.
The smaller back part has Kevlar and durable paper, which are reflexive materials. It allows the cone to make a rebound for a louder sound with resonant bass notes. These all enhance the loudness of the speaker.
Many speakers are encased into speaker boxes that are insulated. The interior and exterior are both carpeted, so the sound won’t escape to an unintended area.
It is also the same case with the built-in wall speakers and car door speakers. So the clearer, more resonant sound surfaces from a speaker housing that is well insulated.
Location can affect the speaker’s volume. You have to analyze the location and direction where you place your speakers. It should be angled properly to the wall or related room.
You can work on the sound of a small speaker with low wattage.
Can You Get a Fantastic Bass Even Without Amplifier and Subwoofer?
You have to face the fact that you can’t get the most out of the car speaker’s bass if there’s no amplifier and subwoofer. The stereo amp is not capable of providing deep bass that is free from distortion.
Even the best speaker can’t give the ideal sound that you wish for, as it’s not big and powerful enough.
A replacement of speakers can have limitations on what you expect from an upgrade. But aftermarket speakers are made of materials in higher quality, so there’s a noticeable difference when it comes to bass response and the overall sound.
You must know that the best coaxial speakers can’t be on the level of the subwoofer’s capability. Although you can upgrade your speaker with the simple type, but you have to set your expectations. It can make some improvements, but it won’t do much on the bass.
The Need to Examine the Bass as Well as Treble Tone Control
You have to do this step before you spend some amount of money on upgrade and enhancement. Something just simple might have been going on.
For example, the settings of tone control may have been changed without your knowledge. There’s also the possibility that changes were also made when you hear more bass from your car speaker. Tone controls appear in physical knobs or like sliders. There’s a menu that you can apply changes on.
When the previous things don’t make any changes nor development, you need help from the user’s manual. You have to go over tone controls of the car radio.
You may need to make some adjustments at some point. The bass may have been turned down, or the treble is tuned way too high.
You can adjust the fade to put the rear speakers attached in a bigger speaker cone in the right state. You can make all the adjustments, but it still can’t keep up with a subwoofer.
Getting a Better Bass For Your Car in the Cheapest Way Possible
If ever you don’t have a head unit or car radio with line-level outputs, the cheapest, as well as the easiest option, is to add a subwoofer that holds speaker-level inputs in your car’s audio system.
Speaker-level outputs can carry out a signal that is enhanced by the head unit’s circuits. A line-level output doesn’t have this capacity.
If you use the usual external amplifier, distortion comes in, and the bass won’t have a good sound. Getting an external amplifier with the feature of speaker level input will put your mind at ease as there’s no need to worry about distortions.
It can be less expensive than getting both the amplifier and subwoofer. You will spend less, and the installation is just easy.
Installing a Powerful Subwoofer on Your Own
The installation of a subwoofer requires tapping of the speaker’s wires, splitting, and putting them together with the sub. The unit should be attached to the electrical system, and it needs the operation of the battery or fuse box.
The thought of installing a subwoofer has a little similarity with the installation of new speakers or an upgrade done with a head unit. You can learn to do it easily, but you should be cautious.
You may struggle when running wires with heat as a short circuit can happen. Since the subwoofer has speaker-level input, the bass will have a much better response, and there’s no need for upgrading the head unit.
You will spend less with not much hassle. But still, the power of a separate amplifier and subwoofer is unbeatable.
How to Find the Best Amplifier
When selecting the best amplifier for your car’s speakers, you have to consider the whole system so your choice won’t overpower it. You need to have a subwoofer amp that is suitable for the general range by RMS or root-mean-square output.
It’s necessary to identify the system of the car stereo. You need to do some tunings before you decide the upgrade.
You can have this guideline:
Factory head units – 50 to 200 watts RMS
Aftermarket head units – 200 to 300 watts RMS
A system with an amp – 5 to 10 times than the channel’s watts RMS
You need to get helpful information regarding your amplifier and subwoofer. Subwoofer amps are formed in a way that it can handle a wide range of subs.
Although it works with any range, it’s still important that you know the compatibility of the amp and the sub. You have to figure out the subwoofer’s impedance that can work with the amp.
In a general view, you would want to get an amplifier that has an RMS rating output that can match or slightly exceed the sub’s rating. Impedance should be something that can go along well with the sub and the amp.
If you have a subwoofer with 1-ohm, you better get an amplifier that can take the 1-ohm load. It would be plain and simple if you only add a single sub, but it can be complicated if there are multiple subs.
Ways to Improve Your Car Bass: Tuning the Car Audio System
Having a subwoofer and amplifier is the way to get more bass out of your car speaker. Adding the components is the beginning of a long process.
If you already have a sub in your car, but it feels like there’s nothing, you will have to refer to possible ways. If you didn’t properly tune it in, you would get muddy sound with some distortions.
Tune it in so you can get better sound. Here are the steps for this necessary action.
1. Put the subwoofer setting completely down. Turn the low-pass filter on the opposite side as it has to be taken way up.
The bass boost should be turned off.
2. Put the head unit to life, and the tone control should be in a medium setting.
3. Play the music that you know well and let it out into very low, medium, and high notes.
4. Put the volume of the head unit to a maximum of 25 to 75 percent.
5. Turn up gradually the amplifier’s gain until there’s clipping sound.
6. Withdraw the gain until the distortion is gone.
7. You have to lower the low-pass filter. It needs to be done slowly until you get rid of middle and high-frequency sounds, which can be produced by vocals and guitars.
You can go over the whole process again, and you can give the boost to the bass of your car speakers.
The subwoofer needs to be tuned in to get the greatest bass ever while the amplifier should be tuned on its own.
Moving the Subwoofer to Locations and Enclosures
Adjusting and tuning contribute a big deal on the improvement of the bass. There are other factors that interfere with the bass’s performance on your car’s audio system.
Turning the sub around or moving it to another side will make some changes. You will come to the point that you would discover that it improves the wires of subwoofer speakers when you reverse the polarity.
All it takes is to swap the position of the wires on how they are connected with the amp and the sub. Re-tuning is required after you’re done with a switch.
If you’re not happy with your car’s audio system and you have all the necessary parts, you can get help from a professional. They have the tools and expertise to do the tuning for you.
Summing it Up
There are different ways for you to improve the bass of your car speaker. One of them may work for you.
However, it’s recommendable to get an amplifier and subwoofer. You can decide for yourself. The upgrade or changes that you’ll make will be based on how you want your audio system to work.