how to install hid conversion kit h1

How to Install HID Conversion Kit H1

Nowadays, many new cars come with HID headlights. HID headlights may be a standard or an upgrade to vehicles. It helps in giving clearer visibility and safety, especially when you are driving at night. If your car doesn’t have built-in headlights, you can always purchase it in the market, just like the HID Conversion Kit H1.

HID headlights can be installed right away to your car. If you do not know how to, then you can ask for the assistance of a professional. Many people think that the installation of HID headlights is complicated, but it’s just pretty simple if you follow the step-by-step process. This article will discuss the proper steps on how to install HID Conversion Kit H1 to your car.

Steps on How to Install HID Conversion Kit H1

HID Conversion Kit H1 is a single beam application HID Kits. These kits have been known to many car owners recently because of its aftermarket feedback. To quickly install the HID Conversion Kit H1, here are the steps to follow:

Step 1. You must first open your vehicle’s hood. It’s where the installation takes place because that’s where the wires are located.

Step 2. Carefully open the back cap of your car’s headlight assembly. Then get the stock bulb. Be careful not to touch the glass of bulb with your finger. Wear gloves as protection.

Step 3. In your car’s headlight housing, carefully insert the xenon light. The removal of the plastic cap will follow. Be careful when you do this and avoid touching the bulb. If ever you touch the bulb, you can always use alcohol to clean.

Step 4. Connect the HID bulb with the ballast. Place the HID bulb into the headlamp socket.

Step 5. Plug in the signal wires. You should take the red and black signal wires with plug connector and insert them into the power socket of the headlamp, inside the headlight.

Step 6. When steps 1-5 are done, you can now connect the ballast. Simply plug the large connector coming from the anti-flicker module or the grommet from the ballast’s input plug. Plug the circular connectors found in the bulb into the corresponding ballast connectors.

Step 7. Test the HID light to check if it lights up successfully. If not, just flip the adapter into 180 degrees. One piece of advice, right before you put your ballasts into place, test your kit first. This is to ensure that all connections are secure.

Step 8. This is the final step, which is turning on the HID light successfully. You can observe that your headlights will be much more precise and brighter.

Conclusion

Upgrading of headlights for your car is not a heavy modification at all. Converting into HID headlights is a smart move you can do for your vehicle, and yourself. These lights avoid any possible accidents to happen, especially when you are driving at night.

It’s an excellent investment to have, and you will not regret it. Just make sure you have installed it properly. If you do not know how to install, there are many car professionals out there to assist you. Remember, this decision is not just about making your car a bit fancy, but this is a big help for you.

Leave a Comment

Your email address will not be published. Required fields are marked *