How to Install Tire Chains on a Pickup Truck

How to Install Tire Chains on a Pickup Truck

Installing tire chains on your pickup truck can be very difficult, so you should do proper research and prepare yourself well before doing anything. It can be very difficult, especially if you will be doing it for the first time. But, this process is not something that you should take lightly, because this can help you be safer, and saner should difficult situations like snows and blizzards will occur in your area. In this article, you will learn about how to install these contraptions if you own a pickup truck.

1. Figure Out The Correct Tire Chains For You

Image source

One of the essential decisions you have to be aware of is getting the particular set of tire chains that are ideal for your pickup truck’s tires. If you have the manual of your pickup truck, you will be able to look through your tire size there. If you don’t, you can check on the numbers written on the sidewall of your actual tires.

It is essential to note, though, that tire chains are still adjustable in terms of their tightness and security. But, it is still important to get the correct size so that you will remain safe. Some pickup trucks require tire chains only on the two front tires, others on the two rear tires, while some requirements for all four tires as they are four-wheel-drive pickup trucks. 

2. Prepare Your Tire Chains and Tires For Installation

Image source

The first thing that you should do is drive your pickup truck, make sure the wheel alignment is straight, and set the pickup truck on the brake. Double-check this because safety is very important in matters like this. Also, double-check your surroundings to make sure that you are secure.

3. Begin Tire Chain Installation

Start with draping the tire chains over the tires. Tuck one tail of the chains under the wheel’s front and let the remaining length drape of the opposite end of the tire. Whether the fastening tool of your chains links, loops, hooks, or clips, make it a point to secure them well and install them facing towards the outside for easier fastening access.

Next, drive your pickup truck forward at about 2 to 3 feet. At this point, the tire partly has chains wrapped around it but with some open spaces remaining. You just have to bring the loose ends together and fasten them using the tools. Use your strength to make the fastening as snug as you can.

Repeat the same process to the rest of your tires.

4. Tighten and Secure Your Work

Once the chains are secure, it is time to check the quality of your work. Drive around, including some turns, and exercising the steering wheel as much as you can. Check whether the tightening and fastening have already loosened. If so, tighten them back as tight as you can go.

Conclusion

Now, you are ready to brave the roads when you are in the middle of intense wintery weather conditions. Just make sure to practice road safety at all times, so that you will not go out of control in the slippery slopes. Do not forget when it is time to remove the chains and always practice pickup truckful and meticulous acts to save your life.

Leave a Comment

Your email address will not be published. Required fields are marked *