how to use portable air pump for car tires

How to Use Portable Air Pump for Car Tires

You may be driving smoothly when suddenly, a flat tire occurs. It can be an unlucky day for you. It’s when you need to improve its performance. You need to maintain its tire pressure. The good thing is that you can inflate the tire with the use of a portable air pump.

Learn First About the Tire Pressure

Know more about the air pressure coming into the tire. The amount will vary upon a load of an axle, the weather, and the number of tire for every axle. You need to check the manual since you are the vehicle owner. This is to know the right pressure amount of the tire. 

Know the amount of compressed air to be added by using a tire gauge. Do not put a lot of air into the tires. This will only let you face more handling and performance issues. Put the right amount of air through the car’s tires so that extra friction is not experienced. Or else, it might raise the temperature of the rubber. 

Just keep in mind that heat is dangerous to the tires. It could also bring harm to the steel cords. Once when the tires are cold, it is time to fill them up. When the temperature is cold, it brings about a more precise reading. As with hot tire, it results in a higher air pressure upon using the tire gauge. 

When your tire becomes flat while driving, you need to wait for thirty minutes so that it will cool. But if you can’t wait up more yet, just inflate the car tires to about three-PSI that is above the suggested amount. 

Get the Car Tires Ready

There should be a stem cap that is screwed on top of the tire’s valve stem. So, have it removed and placed on another side. But, be sure that you never misplace it. Once the cap is right off the valve, the leftover air will escape. Remove the cap only when the compressor is ready for use. 

Turn the Portable Air Pump On

A portable air pump operates on electrical power. So, plug it in to allow the air to accumulate. A small-sized unit usually features a 2-prong plug. A medium and larger compressor would require a 3-prong plug. Use outlets that have the right voltage for the air pump. 

Do not run the compressor using the incorrect circuit. Or else, it might blow the circuit, the compressor, and both. Upon turning the portable air pump on, you will begin hearing the motor working. Such a portable unit has tires. You may move those tires around easily. 

Locate the air pump next to the flat tire. Get the air hose attached to the air pump. Include a quick coupler to the end. The fastener will allow you to push the air through the valve stem. Activate as well the nozzle’s safety position. Secure the valve stem in its hose. And then, turn the machine on. 

It will also vary in the flatness of the tire experienced. Fill the tire up, but it will require some time. The portable air pumps to find already have guides. Just add up the right amount of air. Some of the turn off once the air pressure is already reached. Also, remember not to walk away from the portable air pump when it is running. You want to avoid the tires from overinflating. 

Get the Hose Detached

As you fill-up the car tire, you now need to check its pressure. Most air pumps would monitor the pressure. They will shut it off upon reaching the desired pressure. Do not add more air as it will push the tire gauge down. Once the right amount of air is achieved, the hose must be removed from the portable air pump. Often, a hissing noise is heard upon removing the piece. This is somehow normal. Just place the stem cap right on the valve.

The next time you experience a flat tire, a portable air pump is the only way to solve this. So, use it again as a simple tool to get the flat tire properly inflated. 

Leave a Comment

Your email address will not be published. Required fields are marked *